Pump rate
•250l/min at 0m head and 10m of suction hose
•200l/min at 3m head and 10m of suction hose
•180l/min at 7 m head and 10m of suction hose
Motor
•24v dc 350w ,3100 rpm motor max current draw of 10 A under full load torque of 1.11Nm. Mean operating torque of 0.72Nm with current draw of 9.6 A. maximum possible current draw < 16amps. No load current draw 1.2 amps.
•IP 56 rated CE certified
Impeller
• Patented hybrid vane and stainless turbine delivers high pressure smooth pumping.
•Stainless turbine designed to macerate of solids and paper in emergency situations where floating debris may be encountered
Casing
•Robust aluminium waterproof casing hard anodised and powder coated in rescue orange. The whole pump is non conductive and will not leak current.
•24 volt operating light indicator.
•Supplied with 12 meter marine grade power cable and lanyard for marine emergency and marine salvage operations
•Quick release bracket for ease of removal for either rescue or inspection
•The entire unit is completely rebuildable vastly reducing cost of ownership by significantly
• All cables etc; are fully potted for total waterproofing
•Easy mounting
• Quick release hard anodised bracket for ease of removal for either rescue or inspection
• Bracket base weld able to hull or bulkhead
Wire & Electrics
•All power wire is 2.5mm marine grade and tinned to BS6883 sw4
•Float switch wire 1.5mm 3 core marine grade and tinned to BS6883 SW4
•Connectors when option supplied IP68 rated at 32A at 600V ac/dc
•Cable glands are IP68 and
Warranty
•5 Year Commercial Warranty
|
